Skip to content
Contact Support

Māui Ancillary

The Māui Ancillary Nodes provide access to a Virtualised environment that supports:

  1. Pre- and post-processing of data for jobs running on the Māui Supercomputer or Mahuika HPC Cluster. Typically, as serial processes on a Slurm partition running on a set of Ancillary node VMs or baremetal servers.
  2. Virtual laboratories that provide interactive access to data stored on the Māui (and Mahuika) storage together with domain analysis toolsets (e.g. Seismic, Genomics, Climate, etc.). To access the Virtual Laboratory nodes, users will first logon to the NeSI Lander node, then ssh to the relevant Virtual Laboratory. Users may submit jobs to Slurm partitions from Virtual Laboratory nodes.
  3. Remote visualisation of data resident on the filesystems.
  4. GPGPU computing.

Scientific Workflows may access resources across the Māui Supercomputer and any (multi-cluster) Slurm partitions on the Māui or Mahuika systems.

Notes

  1. The /home, /nesi/project, and /nesi/nobackup filesystems are mounted on the Māui Ancillary Nodes.
  2. The Māui Ancillary nodes have Skylake processors, while the Mahuika nodes use Broadwell processors.

Ancillary Node Specifications
Multi-Purpose nodes 1,120 cores in 28 × Skylake (Gold 6148, 2.4 GHz, dual socket 20 cores per socket) nodes, which will appear as 2,240 logical cores.
Hyperthreading Enabled
Local Disk 1.2TB SSD
Operating System CentOS 7.4
GPGPUs 5 NVIDIA Tesla P100 PCIe 12GB (5 nodes with 1 GPU)
Remote Visualisation NICE DCV
Memory capacity per Multi-Purpose node 768 GB
Interconnect EDR (100 Gb/s) InfiniBand
Workload Manager Slurm (Multi-Cluster)
OpenStack The Cray CS500 Ancillary nodes will normally be presented to users as Virtual Machines, provisioned from the physical hardware as required.

The Māui_Ancil nodes have different working environment than the Māui (login) nodes. Therefore a CS500 login node is provided, to create and submit your jobs on this architecture. To use you need to login from Māui login nodes to:

w-mauivlab01.maui.nesi.org.nz

If you are looking for accessing this node from your local machine you could add the following section to ~/.ssh/config (extending the recommended terminal setup

Host w-mauivlab01 
  User <username> 
  Hostname w-mauivlab01.maui.nesi.org.nz 
  ProxyCommand ssh -W %h:%p maui 
  ForwardX11 yes
  ForwardX11Trusted yes
  ServerAliveInterval 300
  ServerAliveCountMax 2